Beurer LB 50 Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 84
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
19
7 IN THE EVENT OF PROBLEMS
Problem Cause Remedy
No steam
exiting
Appliance not connected to power Insert the plug [14] into the
mains and switch on the
appliance.
Water tank [8] empty. Replenish water.
Water tank [8] not fitted correctly. Fit tank properly.
Appliance
leaking
Water tank [8] leaking. Replace tank.
Water tank [8] not shut properly. Fasten the catch properly.
Steam tower [3] not installed or not
installed correctly.
Install steam tower [3]
properly.
Delay in steam
output
Very cold water in tank. Use warmer water.
Appliance heavily scaled. Descale the appliance.
Red indicator
[A] illuminated
Water tank [8] empty. Replenish water.
Valve on tank catch [9] is covered
with dirt.
Clean the valve.
Appliance heavily scaled. Descale the appliance.
Water tank [8] not shut properly. Close the catch properly.
Water tank [8] not fitted correctly. Fit tank properly.
If the problem persists, please contact customer service.
8 TECHNICAL DETAILS
Rated output 380 W
Nominal voltage 230 V / 50 Hz
Water tank volume approx. 5 litres
Evaporation rate
Level 1: 150 ml/h
Level II: 400 ml/h
Overheating protection Through thermostat
Safeguard against running dry If there is not enough water in the heater unit, the
appliance switches off automatically. The appliance has
a sensor which detects the water level.
Switching 2-stage
Weight 2.8 kg
Dimensions (W / H / D) 235 / 315 / 280 mm
Connection Fixed cable, approx. 2 m in length
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Commentaires sur ces manuels

Pas de commentaire