Beurer PM200+ Manuel d'utilisateur télécharger pdf (Page 19)

If the pulse connection fails to function, reverse the

polarity of the headphone connection as follows.

Windows Phone 7:

Go to “Settings” and select “Heart Rate Settings”.

Set “runtastic Receiver (5.3 kHz)” to ON.

If the pulse connection fails to function, reverse the

polarity of the headphone connection as follows.

After use, disconnect the receiver from the smart-

phone in order to preserve the battery life of the

smartphone.

NOTE

If no heart rate dis-

play appears, open

the

receiver

housing

carefully (as detailed

under “Replacing the

receiver battery”), and

reverse the switch in the housing. Close the hou-

sing and repeat the pulse connection as detailed

under “Activating pulse measurement”.

Alternatively, the music volume may be so high

that it is interfering with the pulse signals. Redu-

ce the music volume.

2. The microphone and speaker are deactiva-

ted when the receiver is connected to the

telephone, but you can continue to use head-

phones.

3. The remote control on the iPhone headphones

does not function when the receiver is con-

nected to the telephone.

4. The receiver is switched on and consumes bat-

tery power as soon as it is connected to the te-

lephone, even if the runtastic app is not active.

Remember to disconnect the receiver when it is

not needed.

5.Theservicelifeofthereceiverbatteryisapprox.

2 years when used for 1 hour per day. If trans-

mission between the receiver and the chest

strap ceases to function, replace the battery as

detailed under “Replacing the receiver battery”

or “Replacing the chest strap battery”.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Beurer PM200+ Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Non Beurer PM200+