Beurer WL 80 Manuel d'utilisateur télécharger pdf (Page 13)

4. The minute display of the alarm ﬂashes in the display.

Use the / buttons to set the minute and conﬁrm

using the Menu/Set button.

END

is brieﬂy shown in the display.

The set alarm is

now activated and appears in the display.

8.1.2 Setting an alarm for each day (

DAY

)

For each alarm that has been set, you can use the

DAY

function to specify the days of the week on which the

alarm should sound.

When the device is switched on, keep pressing the

ALARM button until the desired alarm memory space

appears in the display (

A1, A2 or A3).

Press the / buttons until

DAY

is shown in the

display.

Press the Menu/Set button.

MON

(Monday) and

off

appear in the display.

Use the / buttons to activate (

) or deactivate

(

off

) the alarm for Monday. Confirm using the

Menu/Set button.

TUE

(Tuesday) appears in the display. Make the settings

for the other days of the week in the same way as for

Monday, as described in the previous point. Then set

the alarm time as described in section 8.1.1.

8.1.3 Permanently deactivating the alarm (

OFF

)

To permanently deactivate a set alarm, proceed as

follows:

When the device is switched on, keep pressing the

ALARM button until the desired alarm memory space

appears in the display (

A1, A2 or A3).

Press the / buttons until OFF appears in the display.

3. Conﬁrm using the Menu/Set button.

END appears in the display. The alarm is now

permanently deactivated.

8.2 Switching o the alarm

8.2.1 Switching o the alarm during sunrise:

When the sunrise function is switched on, the device

slowly begins to light up prior to the set alarm time and

"SUNRISE" is shown in the display. You can switch o

this sunrise by pressing any button. However, the alarm

tone will still sound at the set alarm time.

8.2.2 Snooze mode (Snooze) for the alarm

The device features a snooze mode (Snooze).

If the alarm sounds and you press the Snooze function

(by tapping the light area), the alarm will sound again once

the set snooze duration has elapsed (see section 7.4).

8.2.3

Switching o the alarm when the alarm tone sounds

When the alarm sounds, press any button apart from

Snooze. The alarm is now switched o and will only

sound again at the set alarm time.

8.3 AUX mode

You can connect an external audio source (e.g. MP3

player, smartphone or CD player) to the wake-up light

via the AUX input.

1. Connect the supplied AUX cable to an audio source.

Insert the other end of the AUX cable into the AUX input

on the rear of the device.

Press the AUX button on the device. The external audio

source is now connected to the wake-up light.

4. Use the +/- buttons on the side to adjust the volume.

5. Press the ■ button to exit AUX mode again.

6. Disconnect the AUX cable after use.

8.4 USB mode

You have the option of connecting a USB stick (up to

32 GB) to the wake-up light via the USB connection,

enabling you to listen to music. The device can play the

following ﬁle formats: MP3, WMA and WAV.

Note

The device can only play music ﬁles that are stored

inthe root directory. Music ﬁles that are stored in sub-

directories cannot be played.

If you wish to use USB mode, proceed as follows:

Insert the USB stick into the USB connection on the

wake-up light (located on the rear of the device).

2. If the USB stick is already inserted: when the device

is switched on, press the USB button.

"USB", the current song number and the song length

appear in the display.

To switch to the next song, press the button. To switch

to the previous song, press the button. To pause

playback, press the ►ǁ button. To switch between

"Standard playback", "Repeat" (P) and "Repeat all

songs" ( P

ALL

), press the Menu/Set button.

4. Use the +/- buttons on the side to adjust the volume.

5. To end USB mode, press the ■ button.

8.5 Radio mode

You can also use the device to listen to the radio.

If you wish to use radio mode, proceed as follows:

1. When the device is switched on, press the FM button.

The current station frequency and programme number

(e.g.

) appear in the display.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Beurer WL 80 Manuel d'utilisateur Page 13

Commentaires sur ces manuels